quarter_degree_global/code_srdiags_call/initialise_fixed.F

C $Header: /u/gcmpack/MITgcm/model/src/initialise_fixed.F,v 1.45 2006/03/17 16:12:55 jmc Exp $
C $Name:  $

#include "PACKAGES_CONFIG.h"
#include "CPP_OPTIONS.h"

CBOP
C     !ROUTINE: INITIALISE_FIXED
C     !INTERFACE:
      SUBROUTINE INITIALISE_FIXED(myThid)

C     !DESCRIPTION: \bv
C     *==========================================================*
C     | SUBROUTINE INITIALISE_FIXED                               
C     | o Routine for setting fixed model arrays such as          
C     |   topography, grid, solver matrices, etc.                 
C     *==========================================================*
C     | INITIALISE_FIXED is invoked at the start of the model to  
C     | set fixed model arrays. It reads data from an input file  
C     | and from various binary files.                            
C     | Each thread invokes an instance of this routine as does   
C     | each process in a multi-process parallel environment like 
C     | MPI.                                                      
C     *==========================================================*
C     \ev

C     !CALLING SEQUENCE:
C     INITIALISE_FIXED
C      |
C      |-- INI_PARMS
C      |
C      |-- PACKAGES_BOOT
C      |
C      |-- PACKAGES_READPARMS
C      | |
C      | | - MNC_INIT + MNC_CW_INIT
C      | |
C      | | - ${PKG}_READPARMS
C      |
C      |-- SET_PARMS
C      |
C      |-- INI_MODEL_IO
C      |
C      |-- MON_INIT
C      |
C      |-- INI_GRID
C      |
C      |-- INI_EOS
C      |
C      |-- INI_PHIREF
C      |
C      |-- INI_DEPTHS
C      |
C      |-- INI_MASKS_ETC
C      |
C      |-- PACKAGES_INIT_FIXED
C      |
C      |-- PACKAGES_CHECK
C      |
C      |-- INI_LINEAR_PHSURF
C      |
C      |-- INI_CORI
C      |
C      |-- INI_CG2D
C      |
C      |-- INI_CG3D
C      |
C      |-- CONFIG_CHECK
C      |
C      |-- CONFIG_SUMMARY
C      |
C      |-- WRITE_GRID
C      |
C      |-- CPL_EXCH_CONFIGS

C     !USES:
      IMPLICIT NONE
C     == Global variables ==
#include "SIZE.h"
#include "EEPARAMS.h"
#include "PARAMS.h"

C     !INPUT/OUTPUT PARAMETERS:
C     == Routine arguments ==
      INTEGER myThid
CEOP

C--   Set model parameters.
C     Parameters are set to defaults and then updates are read from
C     an input file called data.
      CALL INI_PARMS( myThid )
      _BARRIER

C--   Configure packages
      CALL PACKAGES_BOOT( myThid )

C--   Read configuration parameters for packages
      CALL PACKAGES_READPARMS( myThid )

C--   Set (or reset) parameters (at this point, know which packages are used);
C     after this call, main model parameters are not supposed to be modified.
      CALL SET_PARMS( myThid )

C--   Write units/set precision/etc for I/O of variables/arrays belonging
C     to the core dynamical model
      CALL INI_MODEL_IO( myThid )

#ifdef ALLOW_MONITOR
C--   Initialise MONITOR I/O streams so we can report config. info
      CALL MON_INIT( myThid )
      _BARRIER
#endif

C--   Set model grid.
C     Variables defining model grid spacing are defined.
      CALL INI_GRID( myThid )
      _BARRIER

C--   Set equation of state parameters.
      CALL INI_EOS( myThid )
      _BARRIER

C--   Set pressure/geopotential reference profile
      CALL INI_PHIREF( myThid )
      _BARRIER

C--   Initialise map of depths
      CALL INI_DEPTHS( myThid )
      _BARRIER

C--   Derive masks, lopping factors and recipricols of quantities.
C     Volumes and areas are set according to grid and depth map.
      CALL INI_MASKS_ETC( myThid )
      _BARRIER

C--   Call fixed data initialization phase of packages
      CALL PACKAGES_INIT_FIXED( myThid )

C--   Check dependances between packages
      CALL PACKAGES_CHECK( myThid )

C--   Set Bo_surf => define the Linear Relation: Phi_surf(eta)
      CALL INI_LINEAR_PHISURF( myThid )

C--   Set coriolis operators
      CALL INI_CORI( myThid )

C--   Set laplace operators for use in 2D conjugate gradient solver.
      CALL INI_CG2D( myThid )

#ifdef ALLOW_NONHYDROSTATIC
C--   Set laplace operators for use in 3D conjugate gradient solver.
ceh3 needs an IF ( useNONHYDROSTATIC ) THEN
      CALL INI_CG3D( myThid )
#endif

C--   Check parameters and model cofiguration
      CALL CONFIG_CHECK( myThid )

C--   Finally summarise the model cofiguration
      CALL CONFIG_SUMMARY( myThid )

C--   Write grid data and geometry arrays
      IF ( debugLevel.GE.debLevA .OR.
     &     startTime.EQ.baseTime ) CALL WRITE_GRID( myThid )

#ifdef COMPONENT_MODULE
C--   Post component-model configuration information to coupler
C     and get config. info for other component(s).
      IF ( useCoupler ) CALL CPL_EXCH_CONFIGS( myThid )
#endif

      CALL SRDIAGS_F77_INIT( myThid )
      CALL SRDIAGS_F77_ADDCODES( myThid )

C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----|

      RETURN
      END
1	cnh	1.1	C $Header: /u/gcmpack/MITgcm/model/src/initialise_fixed.F,v 1.45 2006/03/17 16:12:55 jmc Exp $
2			C $Name: $
3
4			#include "PACKAGES_CONFIG.h"
5			#include "CPP_OPTIONS.h"
6
7			CBOP
8			C !ROUTINE: INITIALISE_FIXED
9			C !INTERFACE:
10			SUBROUTINE INITIALISE_FIXED(myThid)
11
12			C !DESCRIPTION: \bv
13			C ==========================================================
14			C \| SUBROUTINE INITIALISE_FIXED
15			C \| o Routine for setting fixed model arrays such as
16			C \| topography, grid, solver matrices, etc.
17			C ==========================================================
18			C \| INITIALISE_FIXED is invoked at the start of the model to
19			C \| set fixed model arrays. It reads data from an input file
20			C \| and from various binary files.
21			C \| Each thread invokes an instance of this routine as does
22			C \| each process in a multi-process parallel environment like
23			C \| MPI.
24			C ==========================================================
25			C \ev
26
27			C !CALLING SEQUENCE:
28			C INITIALISE_FIXED
29			C \|
30			C \|-- INI_PARMS
31			C \|
32			C \|-- PACKAGES_BOOT
33			C \|
34			C \|-- PACKAGES_READPARMS
35			C \| \|
36			C \| \| - MNC_INIT + MNC_CW_INIT
37			C \| \|
38			C \| \| - ${PKG}_READPARMS
39			C \|
40			C \|-- SET_PARMS
41			C \|
42			C \|-- INI_MODEL_IO
43			C \|
44			C \|-- MON_INIT
45			C \|
46			C \|-- INI_GRID
47			C \|
48			C \|-- INI_EOS
49			C \|
50			C \|-- INI_PHIREF
51			C \|
52			C \|-- INI_DEPTHS
53			C \|
54			C \|-- INI_MASKS_ETC
55			C \|
56			C \|-- PACKAGES_INIT_FIXED
57			C \|
58			C \|-- PACKAGES_CHECK
59			C \|
60			C \|-- INI_LINEAR_PHSURF
61			C \|
62			C \|-- INI_CORI
63			C \|
64			C \|-- INI_CG2D
65			C \|
66			C \|-- INI_CG3D
67			C \|
68			C \|-- CONFIG_CHECK
69			C \|
70			C \|-- CONFIG_SUMMARY
71			C \|
72			C \|-- WRITE_GRID
73			C \|
74			C \|-- CPL_EXCH_CONFIGS
75
76			C !USES:
77			IMPLICIT NONE
78			C == Global variables ==
79			#include "SIZE.h"
80			#include "EEPARAMS.h"
81			#include "PARAMS.h"
82
83			C !INPUT/OUTPUT PARAMETERS:
84			C == Routine arguments ==
85			INTEGER myThid
86			CEOP
87
88			C-- Set model parameters.
89			C Parameters are set to defaults and then updates are read from
90			C an input file called data.
91			CALL INI_PARMS( myThid )
92			_BARRIER
93
94			C-- Configure packages
95			CALL PACKAGES_BOOT( myThid )
96
97			C-- Read configuration parameters for packages
98			CALL PACKAGES_READPARMS( myThid )
99
100			C-- Set (or reset) parameters (at this point, know which packages are used);
101			C after this call, main model parameters are not supposed to be modified.
102			CALL SET_PARMS( myThid )
103
104			C-- Write units/set precision/etc for I/O of variables/arrays belonging
105			C to the core dynamical model
106			CALL INI_MODEL_IO( myThid )
107
108			#ifdef ALLOW_MONITOR
109			C-- Initialise MONITOR I/O streams so we can report config. info
110			CALL MON_INIT( myThid )
111			_BARRIER
112			#endif
113
114			C-- Set model grid.
115			C Variables defining model grid spacing are defined.
116			CALL INI_GRID( myThid )
117			_BARRIER
118
119			C-- Set equation of state parameters.
120			CALL INI_EOS( myThid )
121			_BARRIER
122
123			C-- Set pressure/geopotential reference profile
124			CALL INI_PHIREF( myThid )
125			_BARRIER
126
127			C-- Initialise map of depths
128			CALL INI_DEPTHS( myThid )
129			_BARRIER
130
131			C-- Derive masks, lopping factors and recipricols of quantities.
132			C Volumes and areas are set according to grid and depth map.
133			CALL INI_MASKS_ETC( myThid )
134			_BARRIER
135
136			C-- Call fixed data initialization phase of packages
137			CALL PACKAGES_INIT_FIXED( myThid )
138
139			C-- Check dependances between packages
140			CALL PACKAGES_CHECK( myThid )
141
142			C-- Set Bo_surf => define the Linear Relation: Phi_surf(eta)
143			CALL INI_LINEAR_PHISURF( myThid )
144
145			C-- Set coriolis operators
146			CALL INI_CORI( myThid )
147
148			C-- Set laplace operators for use in 2D conjugate gradient solver.
149			CALL INI_CG2D( myThid )
150
151			#ifdef ALLOW_NONHYDROSTATIC
152			C-- Set laplace operators for use in 3D conjugate gradient solver.
153			ceh3 needs an IF ( useNONHYDROSTATIC ) THEN
154			CALL INI_CG3D( myThid )
155			#endif
156
157			C-- Check parameters and model cofiguration
158			CALL CONFIG_CHECK( myThid )
159
160			C-- Finally summarise the model cofiguration
161			CALL CONFIG_SUMMARY( myThid )
162
163			C-- Write grid data and geometry arrays
164			IF ( debugLevel.GE.debLevA .OR.
165			& startTime.EQ.baseTime ) CALL WRITE_GRID( myThid )
166
167			#ifdef COMPONENT_MODULE
168			C-- Post component-model configuration information to coupler
169			C and get config. info for other component(s).
170			IF ( useCoupler ) CALL CPL_EXCH_CONFIGS( myThid )
171			#endif
172
173	cnh	1.2	CALL SRDIAGS_F77_INIT( myThid )
174			CALL SRDIAGS_F77_ADDCODES( myThid )
175
176	cnh	1.1	C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-\|--+----\|
177
178			RETURN
179			END